Desmontar tapizado de montantes

Beeckman89

Forero Experto
Motor
1.5 TSI 150 CV DSG
Versión
Sportline
Color
Azul Race Met.
Buenas compañeros!

Me dispongo a desmontar los cinturones para cambiarlos de color, he desmontado el tapizado inferior pero la parte superior no me sale, se han soltado las grapas de la parte inferior de la pieza pero por arriba no hay forma. Donde pone airbag es una tapa con tornillo en el interior?

Gracias a tod@s!!!
 
Última edición:

Eidon

Forero Experto
Motor
1.5 TSI 150 CV DSG
Versión
Sportline
Color
Azul Race Met.
Buenas compañeros!

Me dispongo a desmontar los cinturones para cambiarlos de color, he desmontado el tapizado inferior pero la parte superior no me sale, se han soltado las grapas de la parte inferior de la pieza pero por arriba no hay forma. Donde pone airbag es una tapa con tortilla en el interior?

Gracias a tod@s!!!
Desde el móvil no te lo puedo poner pero en el ETKA online tienes el despiece y por los gráficos seguro que sacas como hacerlo.

 

Dave

Moderador
Miembro del equipo
Ubicación
Barcelona
Motor
1.5 TSI 150 CV
Versión
Style
Color
Gris Cuarzo Met.
Extracción e instalación del panel de revestimiento del pilar B

– Soltar la tapa -3- del tornillo marcado con “airbag” (según equipamiento del vehículo).
– Quitar el tornillo -2- (1,5 Nm).
– Soltar el panel embellecedor -4- de los enganches -6- y -7-.
– Extraiga el panel de revestimiento -4- en el extremo superior de los soportes del techo.
– Después de quitar el tornillo inferior del cinturón, pasar el cinturón de seguridad -5- a través del guarnecido -4-.

1648925409050.png
 

Jordi_fs

Forero Activo
Motor
2.0 TSI 190 CV DSG 4x4
Versión
Sportline
Color
Gris Steel
Buenos días!
Retomo este hilo, para ver si me podéis ayudar encontrando como desmontar el tapizado del maletero izquierdo (pilar C), he estado investigando en ETKA pero la versión gratuita online no deja o no encuentro la forma de verlo.

Muchas gracias!!!
 

Dave

Moderador
Miembro del equipo
Ubicación
Barcelona
Motor
1.5 TSI 150 CV
Versión
Style
Color
Gris Cuarzo Met.
Buenos días!
Retomo este hilo, para ver si me podéis ayudar encontrando como desmontar el tapizado del maletero izquierdo (pilar C), he estado investigando en ETKA pero la versión gratuita online no deja o no encuentro la forma de verlo.

Muchas gracias!!!
Removing and installing trim panel of pillar C

– Loosen the C-pillar trim panel -1- in the front area out of the double-braided strip of the door seal.
– Removing side trim panel in luggage compartment ⇒ “6.6 Removing and installing luggage compartment side trim panel” .
– Removing body-bound rivet -3-.
– Loosen the trim panel from the retaining clips -2-.
– Push the guides of the C pillar trim panel out of the openings in the roof and take the trim panel out of the vehicle.

1685089577612.png


Removing and installing door sill panel

– Detach the sill panel -4- at the connection point with the front door sill panel -1-.
– Unclip all the retaining clips -2- of the door sill panel.
– Slide the door sill panel out of the luggage compartment side trim panel.
– Remove the door sill panel - 4 - from the vehicle.
– Unclip the door sill panel -1- from the retaining clips -2-.
– Detach the door sill panel from the bottom trim panel of the Bpillar.
– Pull the seat belt -3- out of the trim panel -1-.
– Take the sill panel - 6 - out of the vehicle.

1685089727386.png


6.6 Removing and installing luggage compartment side trim panel

Removing and installing luggage compartment side trim panel


– Remove rear seat (“2.2 Removing and installing the rear seat bench / individual seats”.
– Remove the luggage compartment floor.
– Remove panel for tools (depending on equipment).

1685089980894.png

– Remove the bottom trim panel of pillar C

– Remove top part of side luggage compartment trim panel

– Remove the bottom trim panel of pillar C​
– Remove lock carrier trim.​
– Remove the luggage compartment floor.​
– Handle with luggage hooks, lashing eyes (depending on equipment fitted) .​
– Remove screw -2- (2,5 Nm).​
– Unclip the panel - 1 - from the clips and remove it from the vehicle..​
1685090163039.png

Removing and installing bottom C-pillar trim panel

– Remove rear seat .
– Removing body-bound rivet -3-.
– Remove expanding nut -6-.
– Unclip the trim in order from the clips -2- and -4-.
– Take the trim - 1 - out of the vehicle.

1685090296510.png
 

Jordi_fs

Forero Activo
Motor
2.0 TSI 190 CV DSG 4x4
Versión
Sportline
Color
Gris Steel
Mil gracias @Dave me ha sido de mucha utilidad, lleve el coche para que me pusieran la bola de remolque y al desmontarlo no lo dejaron bien montado y donde fui me quedaba algo retirado de casa y por no volver a ir decidí probar suerte.
Me arrepiento muchísimo de no ponerle el extra del enganche de origen, pero era algo que no contemplaba que iba a utilizar a tan corto plazo

Muchísimas gracias!!!
 
Arriba